Filter
Top Products
INSTALLATION
Installation site
To
operate this unit properly and to obtain maximum performance, install the unit
in
a location with the
following conditions:
1.
A
location
not
subjected
to
direct
sunlight
Installation
in
a location subjected to direct sunlight might lead to inadequate cooling.
2. A
location
with
adequate
ventilation
Always keep
in
front of air intake and exhaust area open for free air circulation. Poor ventilation will result
in
inadequate cooling.
3. A
location
away
from
heat generating
sources
Avoid installing the unit near heat-emitting appliances such as gas ranges or stoves.
4. A
location
with
a
sturdy
and level
floor
Install the unit
on
a sturdy floor to avoid vibration and noise. Placing the unit
on
an unsteady floor may
cause vibration and noise.
~
WARNING
Be
sure
to
install the
unit
on
a
sturdy
floor. If the floor
is
not strong enough or the installation site
is
not
adequate, this may result
in
injury from the unit falling or tipping over.
~
CAUTION
Select a level and
sturdy
floor
for
installation. This precaution will prevent the unit from tipping.
Improper installation may result
in
water spillage or injury from the unit tipping over.
5.
A
location
not
prone
to
high
humidity
~
WARNING
Do
not
use
the
unit
outdoors. Current leakage or electric shock may result if the unit
is
exposed to rain
water.
Never
install
the
unit
in a
humid
place
or
a place where
it
is
likely
to
be splashed
by
water.
Deterioration of the insulation may result which could cause current leakage or electric shock.
Do
not
install the
unit
under
water
pipes
or
steam pipes. Deterioration of the insulation may result which
could cause current leakage or electric shock.
6. A
location
without
a flammable
or
corrosive
gas
Avoid placing the unit where chemicals are stored or gases are produced.
Also avoid areas where there
is
a
great
deal
of
dust.
~
WARNING
Never
install
the
unit
in a flammable
or
volatile
location. This may cause explosion or fire.
Never
install
the
unit
where acid
or
corrosive
gases are present
as
current leakage or electric shock may
result due to corrosion.
11
English