![](http://pdfasset.owneriq.net/7/aa/7aaa2323-382d-4371-987b-0f81d770da4c/7aaa2323-382d-4371-987b-0f81d770da4c-bgb.png)
1. The bin control is a device that senses light,
therefore it must be kept clean so it can “see”. At
least twice a year, remove the bin control sensors
from the base of the ice chute, and wipe the inside
clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
NME454, 654 & FME504, 804
January 2007
Page 10
ICE LEVEL SENSORS
SLIDE TO REMOVE
CLEAN THE
LIGHT SENSORS
SENSOR MAINTENANCE
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.