Scotsman Ice FME804 Ice Maker User Manual


 
INTRODUCTION
To the owner or user: This manual is intended to
provide you with the information needed to install,
start up, clean, and maintain this ice system.
This is a modular ice system that fits a variety of
Scotsman ice storage bins.
NME454, 654 & FME504, 804
January 2007
Page 1
Table of Contents
FOR THE INSTALLER ······································ Page 2
SAMPLE BIN AND MACHINE COMBINATIONS ························· Page 3
FOR THE INSTALLER ······································ Page 4
FOR THE INSTALLER: Location ································· Page 5
FOR THE PLUMBER ······································· Page 6
FOR THE ELECTRICIAN ····································· Page 7
FOR THE INSTALLER ······································ Page 8
INITIAL START UP ········································ Page 9
CLEANING & SANITIZING ···································· Page 10
SENSOR MAINTENANCE ···································· Page 11
AIR COOLED MAINTENANCE ·································· Page 12
BEARING MAINTENANCE ···································· Page 13
AUGER MAINTENANCE ····································· Page 14
REMOVAL AND REPLACEMENT: Bin Controls ························· Page 15
What to Do Before Calling for Service ······························ Page 16
Note this symbol when it appears.
What to Do Before Calling for Service
If the machine is off, not making ice:
1. Check the water supply to the ice machine. The machine is designed to shut off
if there is no water to it. Check the filters if there are any.
2. Check the power supply to the machine. Reset the breaker if it is tripped.
3. If both water and power have been checked and are available, try switching the
power Off and then On. After 2 minutes the machine should restart.
If this procedure restarts the machine, service should be called the next time the
machine stops.