Filter
Top Products
ange Control
CANCELS BAKE,
BROIL OR
CLEAN OPERATION
PROGRAM
STATUS
DISPLAY
CLOCK /
TIMER
DISPLAY
'TEMPERATURE
DISPLAY
FUNCTION
DISPLAY
UP ARROW PAD
(INCREASES TIME
OR TEMPERATURE)
PRESS TO TURN
TIMER ON AND OFF
I
SET AUTOMATIC
OVEN OPERATIONS
Your range control is touch controlled. To set BAKE,
BROIL, TIMER or CLEAN, touch the desired function pad
and select the temperature or time by touching the arrow
pad.
TO SET THE CLOCK:
2_
Press CLOCK. The word "TIME" will flash in the
display.
Press the UP or DOWN arrow pad to select the correct
time of day. Hold your finger on the arrow pad to
change display numbers quickly. Touch and release
the arrow pad to change the time slowly. See Fig. 1.
DOWN ARROW PAD
(DECREASES TIME
OR TEMPERATURE)
The TIMER display will increase as follows:
:10 TEN SECONDS See Fig. 2
t:00 ONE MINUTE .......................See Fig. 3 ........
1HR:00 ONE HOUR See Fig. 4 .......
When the display reaches one hour, the display will
change. "HR" will appear in the display.
DISPLAYS TEN SECONDS
INCREASE OR
(_ DECREASE TIME
Fig. 2
DISPLAYS ONE MINUTE ZERO SECONDS
Fig° 1
(_ INCREASE OR
DECREASE TIME
TO SET THE T|MER:
NOTE: The TIMER does not control oven operations.
The maximum time setting is 9 hours and 55
minutes.
1. Press TIMER. "TIMER" will flash In the display.
2o Press the UP or DOWN arrow pad to select the
amount of time. Hold your finger on the arrow pad to
change thetime quickly. Touch and release the arrow
pad to change the time slowly. The TIMER will
automatically begin counting down after a few
seconds.
3. When the time is up, the end-of-cycle tone will beep.
Press CLOCK to return the time of day to the display.
(_) INCREASE OR
DECREASE TIME
Fig, 3
DISPLAYS ONE HOUR ZERO MINUTES
HOLD INCREASE OR
(_) TO CANCEL TIMER DECREASE TIME
6 Fig, 4 NCERC08