ENGLISH
11
Setting Cooktop Controls
Locking the Controls
The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.
To Turn ON the Controls Lock Feature:
1. The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the
key pad until a beep sounds (about 1 second). The Power Indicator light located above the key pad will turn
OFF.
2. Touch the key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the key pad will
turn ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 5)
To Turn OFF the Controls Lock Feature:
1. Touch the key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the key pad will
turn OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be
used (See Fig. 4).
2. If the cooktop is needed you must touch and hold the key pad until a beep sounds (about 1 second). The Power
Indicator Light located above the key pad will turn ON. (See Fig. 7). You may now activate any of the Cooking
Zones.
Minute Timer
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track
of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count
down minutes once set.
To Set the Minute Timer:
1. Touch the
listed under the word “TIMER”. Touching and releasing the or the key pads will increase
or decrease the Minute Timer setting by 1 minute with each key press (up to
9999
9999
99
minutes).
2. Once the Timer LED displays the desired amount of time, release the UP or DOWN Arrow key pads. The Minute Timer
LED will flash the time with a small dot to the right. Once the LED quits flashing and the dot disappears the
MinuteTimer will begin the countdown with remaining minutes. Once the Minute Timer reaches
0000
0000
00 a long beep will
sound indicating that the time is up.
To Cancel the Minute Timer:
1. Touch the and key pads at the same time or touch and hold either the or key pad and
scroll to
0000
0000
00.
2. If cancelling the Minute Timer using the scrolling method, once the Main Control LED reaches
0000
0000
00, release the Arrow
key pad.
3. The LED will flash momentarily and then quit flashing. The set time will disappear from the LED indicating that the
MinuteTimer is no longer active.