Sears 911.92761 Range User Manual


 
REMOVABLEPARTS
CLEANING MATERIALS TO USE:
Dishwashing detergent
Warm water
* Soft cloth
MOLDED
RIB
_$PRING
CLIP
CLEAR GROOVE
IN STEM
TO REMOVE:
1. Be sure the control knob is in the off
position.
2. Pull straight off the stem.
Using a piece of string can make removing the
knob easier. Slip the string under and around
the knob, pulling straight out.
TO CLEAN:
Wash the knob throughtly with soapy water.
Dry completely with a soft cloth. DO NOT let
the knob soak.
_ CAUTION: Be sure the oven
light switch Is in the off
position. Do not touch a hot
light bulb with wet hands or a
wet cloth. Wait until the bulb
has cooled and use a dry cloth. Never
touch the live collar of the bulb. If you
are replacing a broken light bulb, make
sure the power supply is off.
GLASS
j._E COLLAR
BULB
TO REPLACE:
1. Unscrew the light blub.
2. Replace the bulb with a 3 1/2" 40 watt
appliance bulb.
TO REPLACE:
1. Check the back of the knob. The molded rib
of the knob is designed to fit perfectly onto
the knob stem.
2. Align the the molded rib to the clear groove
in the knob stem.
3. Push the knob back as far as it will go.
14 removable parts continued