Sharp AR-5516N Oven User Manual


 
64
USER SETTINGS
Filter Mode
Enable/disable a filter configuration.
IP Filter Mode
Configure the IP filter operations. Available options
are "ALLOW" and "DENY". If you select "ALLOW",
only the data from the configured IP address range
can be accepted. If you select "DENY", the data
from the configured IP address range cannot be
received.
Start IP Address (Filter address1-4)
Configure the start address of the IP filter. The
value must be configured in the format of a
four-part series of numbers separated by decimal
points, such as "xxx.xxx.xxx.xxx".
End IP Address (Filter address1-4)
Configure the end address of the IP filter. The
value must be configured in the format of a
four-part series of numbers separated by decimal
points, such as "xxx.xxx.xxx.xxx".
IPv6 Filter Mode
Configure the IPv6 filter operations. Available
options are "ALLOW" and "DENY". If you select
"ALLOW", only the data from the configured IPv6
address range can be accepted. If you select
"DENY", the data from the configured IPv6
address range cannot be received.
Start IPv6 Address (Filter address1-4)
Configure the start address of the IPv6 filter. The
value must be configured in the format of a six-part
series of hexadecimal numbers separated by
colon, such as "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/64".
End IPv6 Address (Filter address1-4)
Configure the end address of the IPv6 filter. The
value must be configured in the format of a six-part
series of hexadecimal numbers separated by
colon, such as "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/64".
MAC Address Filter Config (Filter address1-10)
Configure the MAC address of the filter. The value
must be hexadecimal numbers in 12 figures.
1
2
3
4
5
6
7
8