Filter
Top Products
SETTING THE CLOCK
8
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
5. When you want to reset the time of day, follow the
above example again.
6. If you do not set the clock, press the STOP button
once. “.0” will appear on the display. When the
operation of the oven is finished, “.0” will
reappear on the display instead of the time of day.
7. If you set the clock, energy save mode does not
work.
There are two setting modes: 12 hour clock and 24 hour clock.
x1
1. To set the 12 hour clock, press
the CLOCK button once, as
shown:
Example:
To set the 24 hour clock to 23:35:
x2
1. Choose the 24 hour clock by
pressing the CLOCK button
twice.
2. Set the hours. Rotate the TIME/
WEIGHT dial clockwise until the
correct hour is displayed.
3. Change from hours to
minutes by pressing the
CLOCK button once.
Check the display.
4. Set the minutes.
5. Start the clock.
NOTES:
1. You can rotate the TIME/WEIGHT dial clockwise
or counter clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the oven is in cooking mode and you wish to
know the time of day, touch the CLOCK button. As
long as your finger is touching the button, the time
of day will be displayed.
4. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door.
The display will show: “.0”.
x2
2. To set the 24 hour clock, press
the CLOCK button twice, as
shown:
x1
x1
USING THE STOP BUTTON
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press
the STOP button twice.
R-677 English 11/8/02 10:14 AM Page 8