Smeg 142396 Refrigerator User Manual


 
142396
Prior to any cleaning. Please disconnect the
appliance from the mains (turn the thermostat
button to the position
and pull the power cord
from the mains outlet). Special antibacterial
protection in top layer of inner walls prevents growth
of bacteria and keeping the interior clean and germ
free.
Please remove traces of any detergents you may
have used.
Clean the exterior of the appliance with warm
water and mild liquid detergent.
For cleaning of plastic, coated, or aluminum parts
avoid using abrasive or special cleansing agents
(like the stainless steel polish), otherwise you may
damage the surface.
Clean coated and aluminum surfaces using the
soft cloth and alcohol based cleaning agent (like
glass cleaner).
Wash the interior of the appliance with liquid
detergent and lukewarm water, mixed with a little
vinegar.
The groove and drain outlet located below the
cooling panel at the rear wall collect the drained
water, so they must not be blocked up
(e.g: with food particles). Make sure you inspect
them periodically and clean if necessary (use
plastic straw to free the outlet hole).
The condenser on the rear wall must always be
clean and free of dust or kitchen fumes deposits,
therefore clean the dust periodically with non-
metallic brush or vacuum cleaner.
Additionally clean also the drip pan above the
compressor. If you removed the pan, please make
sure you replace it in same position, and check
that it is horizontal (very important).
Ice and/or frost deposits exceeding 3-5 mm
increase energy consumption, so should be
removed regularly. Do not use sharp pointed
objects, solvents or sprays.
After cleaning switch the appliance on and place
15
Cleaning