Filter
Top Products
Instructions for the installer
27
2.2 Mounting the oven
The oven is designed for mounting into any piece of furniture as long as
heat-resistant. Proceed according to the dimensions shown in Figures 1,
2.
Fixing is carried out using 4 screws at
the corners "C" of the oven door
frame, after removing the side panels
secured by the screws "A" and the
supports "B" as shown in figure 3. To
replace the side panels, take care to
engage the pins inside them correctly
with the supports "B", then retighten
the screws "A".
3.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.