26
Instructions for the installer
2.3 Connection to the water mains (only in the steam model)
Connect the water inlet socket on the
back to a water socket with a threaded
¾ gas opening, taking care to screw it
tightly to the hose.
If the water piping is new or has been
unused for a long time, before
connection, run the water to make sure
it becomes clear and free of impurities.
Without this precaution, there is a risk
that the water inlet will become
clogged causing damage to the
appliance.
It is recommended to supply the oven
with water pressure between: min. 50
kPa and max. 500 kPa.
2.4 Steam outlet pipe
Depending on the model, there are two
outlet pipes on the back of the oven for
releasing the steam produced during
cooking. These must be left free of
any obstruction. Avoid crushing
them.