Filter
Top Products
29
Instructions for the User
4.3 Choice of programs
This appliance allows you select 40 cooking programs including:
• 38 programs that can be edited and saved as the user wishes
• 1 manual program “P40”
• 1 preheating program with delayed start “P39”
4.4 Humidified cooking operations (only in the steam
model)
The humidified programs that the user can modify are included between
P01 and P40 apart from program P39. For each program it is possible to
increase the number of the humidification cycles from 0 to 10 (where 0
corresponds to traditional cooking without using humidification).
Humidification cycles can be modified only if an oven temperature higher
than 150°C is set.
Water can be allowed to flow inside the cooking chamber only during
cooking, by controlling the relevant inlet valve manually. To do this, just
keep the “START” button pressed for at least one second. Releasing the
button stops the water from flowing in.
The diagram below represents an example of cooking with 5
humidification cycles.