Filter
Top Products
28
Instructions for the User
4. USING THE OVEN
4.1 Warnings and general advice
When using the oven for the first time, heat it up to
its maximum temperature for a duration long
enough to burn off any oily residues from the
manufacturing process.
To access food, always leave the door open as
short a time as possible to prevent the
temperature in the oven from falling and ruining
the food.
4.2 Setting the power
When connecting the oven for the first time, the maximum power
absorbed will appear flashing on the display. If the product is already
connected, this will be in the “OFF” state. In both cases proceed as
follows:
• Press the “PUSH” knob for at least 3 seconds: the display will show
the text “P8.3” (equivalent to the maximum absorbed power of 8.3 kW)
if the oven connection is three phase, or “P5.5” (equivalent to the
maximum absorbed power of 5.5 kW) if the oven connection is single
phase.
• Turn the knob to the or symbols to move between the proposed
power absorptions P8.3, P5.5 and P3.0 (if the oven connection is
three phase), or P5.5 and p3.0 (if the oven connection is single
phase).
• Once you have selected the power, press the “PUSH” button to
confirm the selection.
The power setting operation must be performed the first time that the
oven is connected.
The value set is stored and used automatically whenever the oven is
used subsequently.