Instructions for the user
Press STOP to display the next parameter.
The display shows U t°C.
Press START to display the cooking temperature.
Press START or keep it pressed to increase the preheating temperature;
each time START is pressed the temperature increments by 1°C (from 30°
to 300°).
Press STOP to display the next parameter.
The display shows U Ct.
Press START to display the cooking time.
Press START or keep it pressed to increase the cooking time (from 5 min.
to 99 min.).
Press STOP to complete the program editing procedure.
The display shows UEnd.
The parameters set are now saved in the chosen program.
4.8 Possible error messages on the display
The display is able to show two different types of error:
Err1 = probe failure
Err2 = low voltage : less than 160 volts.
4.9 Technical notes
If the power supply to the appliance fails at any time, always return the
knob to the 0 setting before running any programs.
28