Filter
Top Products
Instructions for the user
display will only show the countdown from 60 to zero seconds (end of
cooking time). When all the cooking time has passed, a BEEP will sound
for 20 seconds and the display will show “End”.
During these 20 seconds the user can
extend the cooking time as
required, in manual mode, as follows.
Press START; the display will show "tp00". From now on, each pressure
on the START key corresponds to one more minute's cooking; up to 10
extra minutes are permitted. Cooking will restart at the programmed
temperature after 5 seconds.
When these additional minutes have passed the program repeats the
cooking end procedure exactly as described above and
after the 20-second BEEP the word "End" will flash for 20 minutes, during
which time the temperature will gradually fall, stabilising at 100°C. After
20 minutes, the oven switches off.
4.5 Manual cooking
Use the knob to select the "easy" program (P10 *).
The special feature of this user-editable program is that the cooking
parameters set are not retained in the memory when the knob is turned to
any other position.
This means that an "empty" program is always immediately available for
quick, easy editing.
4.5.1 How to use this program
Use the knob to select the "easy" program (P10 *).
The display shows “- - - - “ to indicate that there are no cooking
parameters present.
Press START or keep it pressed to increase the preheating temperature;
each time START is pressed the temperature increments by 5°C (from 30°
to 300°).
Press STOP to increase the number of minutes of cooking (N.B. if a
cooking time of 99 minutes is set, the cooking time will be infinite, meaning
that cooking can only be stopped in manual mode, by ending the
program).
Release STOP and preheating will start automatically after 5 seconds.
N.B. – When the cooking process is over, to repeat the same program do
not turn the knob and press START again.
26