Filter
Top Products
Instructions for the User
28
4.3 Program selection
This oven has 10 different cooking programs, including:
2 preset programs (P1 – P2);
6 user-editable programs for humidified fan-mode cooking (P3 to P8),
1 preheating program with user-editable temperature and start and end
time (P9),
1 "easy" editable program for humidified fan-mode cooking (P10).
The following table shows the parameters for each program.
Uprh
preheating
temperature
Ut °C
cooking
temperature
U Ct
cooking
time
Program
start/end
time
H
2
O
P1 210 °C 210 °C 18
minutes
N/A 5,0
P2 240 °C 240 °C 9
minutes
N/A 5,0
P3 Editable Editable Editable N/A Editable
P4 Editable Editable Editable N/A Editable
P5 Editable Editable Editable N/A Editable
P6 Editable Editable Editable N/A Editable
P7 Editable Editable Editable N/A Editable
P8 Editable Editable Editable N/A Editable
P9 Editable N/A N/A Editable N/A
P10 Same as edited
Ut°C
Editable Editable N/A Editable
4.4 Presettings Programs
The first two program selector knob settings are for the presetting cooking
mode programs.
Use the knob to select one of the preset programs (P1–P2).
The display shows the parameters of the selected program (cooking time;
temperature in degrees Centigrade, program number and steam
percentage in the cooking chamber, e.g.P1).
Press START to confirm the start of the program.
The program starts, performing the preheating stage; the display shows
“PrEh”.
When the preheating is complete, a "BEEP" sounds to indicate that
cooking can start.
Press START to start cooking.
(If START is not pressed after the beep, the temperature is held constant
for about 10 minutes, after which it will start to drop for a period up to a
maximum time of 20 minutes, counted from when the beep sounded. After