Filter
Top Products
Instructions for the Installer
112
15.ADAPTING TO DIFFERENT TYPES OF GAS
Before carrying out the operations described below, disconnect the appliance from the electricity supply.
The appliance is tested with natural gas G20 (2H) at the pressure of 20 mbar. If it is to be used with
other types of gas, the burner nozzles have to be changed and the gas tap adjusted to set the minimum
flame. To replace the nozzles, proceed as described below.
15.1 Changing the hob nozzles
7 Remove the pan stands, all the burner caps and the flame diffuser rings
8 Use a 7 mm socket wrench to unscrew the burner nozzles;
9 Replace the burner nozzles depending on the type of gas to be used (see point “15.2 Burner and
Nozzle Data Tables”).
10 Put the burners back into place correctly.