Filter
Top Products
Instructions for the User
99
8. CONTROL PANEL
All the cooker's control and monitoring devices are placed together on the front panel. The table below
provides the key to the symbols used.
THERMOSTAT KNOB FRONT LEFT-HAND BURNER
FUNCTION SELECTOR KNOB REAR LEFT-HAND BURNER
REAR RIGHT-HAND BURNER
FRONT RIGHT-HAND BURNER
If the cooker is equipped with an electronic programmer, before using the oven check that the
symbol appears on the display; see point “11. ELECTRONIC PROGRAMMER”.
HOB BURNER CONTROL KNOB
To light the flame, press the knob and turn it anti-clockwise to the minimum
flame symbol . To adjust the flame, turn the knob to the zone between the
maximum ( ) and the minimum ( ) settings. To turn off the burner, turn the
knob to the appropriate position.
THERMOSTAT KNOB
The cooking temperature is set by turning the knob clockwise to the value
required, between 50° and 275°C.
The orange light comes on to indicate that the oven is heating up. This light
goes out when the set temperature is reached. When it flashes at regular
intervals, the temperature inside the oven is being kept constantly at the set
level.