Filter
Top Products
Instructions for the user
23
12. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.
Before performing any operations requiring access to powered parts, switch off the power supply to the
appliance.
12.1 Changing the light bulb
Remove the protective cover A by unscrewing it anti-clockwise; replace the bulb B with another of the
same type (25 W). Re-fit the bulb protector A.
WARNING : Ensure the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
Use only oven bulbs (T 300°C).
12.2 Removing the door
Lift the levers B and Take hold of the two sides of the door
with both hands near to the hinges A. Raise the door to an
angle of about 45° and remove it. To reassemble, fit the
hinges A into their grooves, then lower the door into place
and release the levers B.
12.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs at the corners as shown in the figure.