Filter
Top Products
GB-IE
Instructions for the User
15
15
8 CLEANING AND MAINTENANCE
Cleaning is the only maintenance action that is required normally.
Warning! Cleaning must be done with the warming drawer
disconnected
from the electrical power supply. Remov
e the plug from the power socket
or disconnect the warming drawer power supply circuit.
Warning!
Do not use aggressive or abrasive cleaning products, abrasive
sponges or pointed objects since stains or abrasion marks may appear.
Warning! Do not use high pressure or steam jet cleaning appliances.
8.1 Appliance front and control panel
The warming drawer can be cleaned using just a damp cloth. If it is very
dirty, add a few drops of washing-up liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted crockery warmers, special products for
treatment of stainless steel surfaces can be used. These products prevent
the surfaces becoming dirty again for some time. Apply a thin layer of such
a product on the surface using a soft cloth.
8.2 Interior of the warming drawer
Clean the inside of the warming drawer regularly using a damp cloth. If it is
very dirty add a few drops of washing-up liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air circulation opening.
Only use the warming drawer again when it is completely dry.
8.3 Mat with non-slip surface
The non-slip surface mat can be removed to facilitate cleaning of the
drawer.
The mat can be cleaned by hand using hot water with a few drops of
washing-up liquid.
Dry thoroughly.
The non-slip mat should only be replaced when it is completely dry.