Filter
Top Products
12
GB
Cleaning
Disconnect the power supply at the mains
socket before cleaning the inside of the
cabinet.
The cabinet is best cleaned using warm
water (max. 65°C) with a little mild
detergent. Never use cleaning agents that
scour. Use a soft cloth. Rinse with clean
water and dry thoroughly. It is important
to prevent water from entering the control
panel.
The sealing strip around the door must be
cleaned regularly to prevent discolouration
and prolong service life. Use clean water.
After cleaning the sealing strip, check that it
continues to provide a tight seal.
Dust collecting on the compressor and
in the compressor compartment is best
removed using a vacuum cleaner. It is
possible to clean beneath the appliance by
removing the kick plate.
Stainless steel or aluminium doors are best
cleaned using a care spray and soft cloth.
Various suitable products are available from
most household appliance distributors.
If the appliance is not to be used for any
length of time, switch it off, empty it, clean
the cabinet and ttings, and leave the
door(s) slightly open to allow air circulation
and prevent smells.
Replacing the light bulb
Unscrew the bulb without removing the
shade.
Bulbs with an output of more than 12 W
must not be used.
Save energy
- Cool hot food and beverages before
placing them in the appliance.
- Thaw frozen items in a refrigerator.
- Keep the door(s) closed as much as
possible
- Ensure that the door(s) is(are) not
prevented from closing tightly.
Cleaning and maintenance
g. 12
Max. 12 W