Smeg DF614FAS7 Dishwasher User Manual


 
User instructions

SWITCHING ON
When the
ON/OFF
button
(1)
is pressed, the dishwasher switches on.
The indicator lights will display the dishwasher's "status".
PROGRAMMING
Programming operations are only possible with the
door closed
.
As long as the door is open, the
PROGRAMS (4)
lights remain off.
PROGRAM SELECTION
Press the
PROGRAM SELECTION
button
(3)
several times until the light of
the program required comes on.
STARTING THE PROGRAM
To start the dishwasher, press the
START/PAUSE
button
(2)
for a few
seconds, until the light of the selected program starts to flash
(confirmation beep).
The light will flash as long as the program is in progress, to indicate that
it is being performed.
END OF PROGRAM
At the end of the program the beeper
sounds briefly and the program
lights 4
and
5
(marked "end") flash.