Filter
Top Products
32
INSTALLATION
•
Make sure that your refrigerator is not near a heat source.
•
Install it in a dry and well ventilated room.
•
To ensure proper ventilation leave a 1 cm space on both sides and above the refrigerator.
•
Clean the inside of the refrigerator before using it.
•
Let the refrigerator stand (don’t move it) for at least one hour before connecting it to the power
supply.
•
The appliance should be connected to a water supply that delivers drinkable or chemically
purified water.
•
Install and level the refrigerator on a floor strong enough to take its weight and in an area
suitable for its size and use.
•
Do not use the refrigerator in an area where the room temperature may fall below 13°C.
•
Be careful not to damage the floors when you move the appliance (e.g. parquet flooring).
61502000GB.fm Page 32 Friday, April 22, 2005 5:00 PM