Filter
Top Products
26
Instructions for the user
12.5.3 Removing the self-cleaning panels
Remove all accessories from inside the oven and proceed as follows:
1 Remove the side grids (fig.1);
2 Slide out the side panels “F” and “G” (fig. 2);
3 Extract the rear panel “A” after first unscrewing the threaded ring “C”
(fig. 2);
4 Reassemble the panels by returning them to their original conditions.
1) 2)
12.6 Removing the door
12.6.1 Removing the door with mobile hinges
With the door completely open, lift the levers A until they touch the hinges
B and take hold of the two sides of the door with both hands close to the
hinges. Raise the door to an angle of about 45° and remove it. If the
hinges have not locked, repeat the operation, raising the levers A and
keeping the door slightly raised. To reassemble, fit the hinges B into their
grooves, then lower the door into place, ensuring that it remains fitted into
the grooves C, and lower the levers A.