Filter
Top Products
27
Instructions for the user
12.6.2 Removing the door with pins
Open the door completely and insert the pins (supplied) into the holes
from the inside. Close the door to an angle of about 45° and lift it off. To
reassemble, fit the hinges into their grooves, then lower the door into place
and extract the pins.
12.7 Removing the glass panels
The glass in the door should always be kept thoroughly clean. For easier
cleaning, the door glazing can be fully removed by proceeding as
described below. After opening the door and locking it in place as
described in point “12.6 Removing the door”, remove the internal glass
panel levering it as illustrated in figure 1, and detach the 4 pins that fix the
glass to the door. If your oven also has a middle glass panel (figure 2) this
can be extracted simply by lifting it upwards. After having carried out the
cleaning, first of all replace the middle glass panel (if your oven has one),
and then position the internal glass hinging it, as shown in figure 3, on the
grooves of the oven door (see part A in figure 3). When the glazing has
been positioned on the door, exert a slight pressure on the four fixing pins.
If the door should close during these operations, simply relock one of the
hinges as described in point “12.6 Removing the door”. The glass panels
can now be washed separately.