Filter
Top Products
58
Instructions for the user
12.4 Removing the inside glass with the door cold
The glass in the door should always be kept thoroughly clean. For easier
cleaning, the door glazing can be fully removed by proceeding as
described below. After opening the door and locking it in place as
described in point “12.2 Removing the door”, remove the three panes of
glass. All extracted in two stages: first extract the pane from the guide “A”
(see detail) by sliding it towards you and lifting it slightly, then also free it
from the guide “B”. If the door should close during these operations,
simply relock one of the hinges as described in point "12.2 Removing the
door". The panes of glass can now be washed separately.
Use absorbent kitchen roll; remove stubborn dirt with a damp sponge and
ordinary detergent.
Warning: before removing the panes of glass, make sure that at least one
of the door's hinges has been locked in open position as described in
points “12.2 Removing the door”. This operation might have to be
repeated during the glass removal process if the door is accidentally freed.
Warning: Replace the panes of glass in the same order and in the same
position as before removal, taking care to push the last pane with the
marking into the guide A to lock it in place. When complete, release the
hinges and close the door.