Filter
Top Products
Instructions for the User
11
After the setting, to view the cooking time left press the key; to view the cooking end time press the
key. The logic prevents the setting of incompatible values (e.g. the timer will not accept a cooking end
time with a duration which is too long for this value).
7.4 Timer
The programmer can also be used as an ordinary timer. Press the key and the display will show the
figures ; keep it pressed and simultaneously press the value modification keys or . When
the key is released the programmed count will start and the display will show the current time and the
symbol
After the setting, to display the time left press the key.
In timer mode, the system will not cut out operation of the oven at the end of the set time.
7.5 End of cooking
At the end of the cooking time the oven will switch off automatically and simultaneously a buzzer will
start to sound in on-off mode.
After the buzzer is stopped, the display will return to showing the current time together with the
symbol, indicating that the oven is again ready for use in manual mode.
7.6 Adjusting the buzzer volume
The buzzer volume can be varied (3 settings) while it is in operation by pressing the key.
7.7 Stopping the buzzer
The buzzer stops automatically after seven minutes. It can be stopped in manual mode by pressing the
and keys together. To switch off the oven, return all the knobs to the 0 setting in sequence.
7.8 Deleting the data set
With the program set, keep the key of the function for deletion ( or ) pressed, while at the same time
setting the value by pressing the value modification keys or . The programmer will interpret
deletion of the duration as the end of cooking.
7.9 Modifying the data set
The cooking data set can be modified at any moment by keeping the key of the function for modification
( or ) pressed and at the same time pressing the value modification keys or .