Smeg SE640ID1 Cooktop User Manual


 
Instructions for the User
37
6.9 Residual heat indicator
The hob is equipped with a residual heat indicator in the form of the symbol.
When is displayed after the heat has been switched off, it indicates that the residual heat can be used
to keep food hot or melt certain foods.
The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns!
The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the
saucepans.
6.10 Cooking zones
The appliance has 4 cooking zones of various power levels and diameters. Their position is clearly
indicated with circles and the heat is limited to within the diameters traced on the glass.
The 4 cooking zones are of the HIGH-LIGHT type; they turn on after a few seconds and their heat level
can be adjusted by means of the controls on the front panel from 1 (min.) to 9 (max.).
FRONT LEFT HOTPLATE REAR RIGHT HOTPLATE
REAR LEFT HOTPLATE FRONT RIGHT HOTPLATE
6.11 Control panel
All the appliance's control and monitoring devices are placed together on the front panel. The symbols
used are described in the table below.
REAR LEFT COOKING ZONE /
INCREASE VALUE
REAR RIGHT COOKING ZONE /
INCREASE VALUE
FRONT LEFT COOKING ZONE /
INCREASE VALUE
FRONT RIGHT COOKING ZONE /
INCREASE VALUE
DECREASE VALUE BUTTON TIMER BUTTON
LOCK SENSORS BUTTON HOB ON / OFF BUTTON
STOP BUTTON