Filter
Top Products
Instructions for the installer
48
11.6 Inserting the hob into the hole in the work surface
Be very careful when inserting the hob. If the process is not followed correctly as described, the hob may
be damaged.
• Insert the hob, resting the frame completely on the back
edge of the hole in the work surface. Do not apply
pressure to the frame as this part is very fragile and
could be damaged.
• Then lower the front of the hob until it is fully inserted.
11.7 Fixing using brackets
• Fix brackets A using the appropriate screws as
illustrated.
• The figure to the side shows the exact holes to be used
to correctly attach the hob to the work surface with
brackets.