Smeg ST4108 Dishwasher User Manual


 
User instructions
11
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
3.2 Washing programs
Before starting a washing program make sure that:
The water supply tap is open.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
"3/1" OPTION BUTTON
(available in all programs except the soak program)
By pressing the button (6) you activate the "3/1" option, confirmed when
the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.
Note: When selecting the "3/1" button, it is normal that the salt and
rinse-aid lights remain on, if their containers are empty.
DELAYING THE PROGRAM
(available in all programs except the soak program)
The PROGRAM DELAY button (8) can be pressed to delay the start
ofthe program by up to 9 hours. This means that the dishwasher can
beoperated at the time of day of your choice. Press the button
severaltimes in succession and the display will show the delay with
which theappliance will start, beginning from 9 hours.