Filter
Top Products
User instructions
25
CLEANING THE SPRAY ARM, TRAVELLING VERSION
To remove the TRAVELLING spray arm, take hold of it and raise it to
release both the spray arm and the pipe from the tank, then detach the
spray arm from the pipe. Wash both the pipe and the spray arm in
running water, re-attach the spray arm to the pipe and return the
assembly to the seat provided in the tank.
Once the assembly has been put back in place, check that the
spray arm turns freely (turn through a couple of revolutions by
hand) and that the pipe is able to travel without impediments.
Otherwise, check that it has been fitted correctly.
CLEANING THE FILTER UNIT
• The central filter H should be inspected regularly and cleaned if
necessary. To remove it, take hold of the handle, turn anti-clockwise
and lift.
• Press the central filter H from below to extract it from the micro-filter.
• Separate the two parts of the plastic filter by pressing the body of
the filter in the zone shown by the arrows.
• Remove the central filter by lifting it.