SPX Cooling Technologies 05-116E Refrigerator User Manual


  Open as PDF
of 36
 
10
equipment. Electrical savings can be large during periods of low ambient
temperature when the cooling requirement can be satisfied at reduced
speeds. To benefit from these advantages, it is important that the drive
be installed correctly.
Marley supplies VFD and VFD controls specically designed for our cooling
products. If you have purchased a Marley VFD and/or controls package,
please follow the instructions in the User Manual for that system. Most
VFD problems can be avoided by purchasing the Marley drive system. If
you are installing a VFD other than the Marley drive, please refer to that
drives installation manual.
ImproperuseofaVFDmaycausedamagetoequipmentorpersonal
injury. Failure to correctly install the VFD drive will automatically void
allwarrantiesassociatedwiththemotorandanyequipmentthatis
eitherelectricallyormechanically(directly)attachedtotheVFDdrive
system. The length of this warranty avoidance will be contingent on
properly installing the VFD system and repairing any damage that
may have occurred during its operation. SPX Cooling Technologies
does not assume responsibility for any technical support or damages
forproblemsassociatewithnon-MarleybrandVFDsystems.
Changing the operational fan speed from the factory settings could
cause the fan to operate in an unstable region which may result in
damagetotheequipmentandpossibleinjury.
Warning
Warning
Installation
 previous next