Starbucks Barista SUP021 YDR Espresso Maker User Manual


 
ENGLISH
• 14 • Questions? Call us at 1.800.334.5553
The display will next read:
6)
ENERGY SAVING
The machine is now on ENERGY SAVING
mode. If you wish to continue programming
press the MENU/OK button. The machine
display will change to SELF TEST:
7)
SELF TEST
SELF TEST will be displayed for about 3
seconds and then the display will read
WARMING UP…:
8)
WARMING UP...
Now press the MENU/OK button again and
your display once again will read ENERGY
SAVING/ RINSING:
9)
ENERGY SAVING *
RINSING
Now press once the CURSOR v DOWN
button on the control panel (this is also the
One long shot/ Two long shot button) and
the display will show:
10)
RINSING *
LANGUAGE
Press the MENU/OK button again to
choose whether you want to have the
rinsing function on or off. The display will
now read:
11)
RINSING
ON
To select RINSING ON just confirm
MENU/OK.
To select RINSING OFF press the CURSOR
^ UP button. (This is also the Single shot/
Double shot button) The display will now
read OFF and you must press MENU/OK
to confirm this choice. Now proceed to
program the next function LANGUAGE/
WATER HARDNESS.
12)
LANGUAGE *
WATER HARDNESS
To go into the LANGUAGE selection, just
press the MENU/OK button. The display
the LANGUAGE you prefer, move the
CURSOR v DOWN button and pick from
the languages displayed.
The default setting is ENGLISH.
The other languages in order are: ITALIANO
(Italian), FRANÇAIS (French), DEUTSCH
(German), NEDERLANDS (Dutch),
PORTUGUES (Portuguese), ESPAGNOL
(Spanish) and POLISH. As soon as the
language has been chosen, press the
MENU/OK button to confirm your choice
and then move the CURSOR v DOWN
button. You will see WATER HARDNESS/CUP
WARMER displayed.
13)
WATER HARDNESS *
CUP WARMER
Now select the WATER HARDNESS. First test
the water from your faucet to determine your
water hardness.
Dip the hardness strip provided with the machine
into the water tank for 1 second. You will have
a choice of 4 different water hardnesses. If
you don’t wish to perform the test, then set the
hardness at number 3. To select the hardness
on the display, move the CURSOR v DOWN
button or the CURSOR ^ UP button until you
find the right number. Once you have made
your choice, press the MENU/OK button. The
CUP WARMER is the next function when you
press the cursor down.
14)
CUP WARMER *
TEMPERATURE
The CUP WARMER can be set ON or OFF.
Press the MENU/OK button to go into the
CUP WARMER function, confirm the CUP
WARMER ON function or move the cursor
down to select CUP WARMER OFF and then
confirm by using the MENU/OK button.
Now if you move the CURSOR v DOWN
button, you will be ready to program the
brewing temperature.