Filter
Top Products
BJ5-615 Chapter 4: Operation 30 of 85
Emptying the Screen (hydraulic screen)
1. Switch OFF the shredder at the main switch.
2. Safeguard main switch using a padlock.
3. Open the lower machine door.
4. Safeguard the machine door.
5. Pivot the screen support downwards by pushing the button screen open on the control
box.
6. Remove the screen.
7. Empty the screen.
8. Put the screen back into the screen support.
9. Pivot the screen support into the working position and fasten using the mounting
screws.
10. Close the machine door.
11. Shredder can be started again.
(1) Hydraulic cylinder
(2) Screen support
(3) Screen
(4) Rotor
1
2
3
4