Sub-Zero 315W Beverage Dispenser User Manual


 
Dimensions in parentheses are in
millimeters unless otherwise specified.6
SUB-ZERO MODEL 315W INSTALLATION
INSTALLATION SPECIFICATIONS
AREA REQUIREMENTS
Before moving the unit into place, be sure that
the rough opening dimensions, electrical
location, and minimum door clearances are
accurate. Refer to the illustration below. Also
Refer to page 5 for overall dimensions.
Be sure your electrician and cabinet installer
have this information before finishing work is
completed.
IMPORTANT NOTE:
Make sure the floor under
the unit is level with the surrounding finished
floor.
IMPORTANT NOTE:
For corner installations,
door swing may be limited due to handle
contact with the adjacent wall or cabinet face.
You must allow a minimum of 2" (51) from the
wall for a 90˚ door opening. This will ensure
that the wine shelves can be fully extended.
34
1
/2" (876)
ROUGH
OPENING
HEIGHT
34
1
/16" (865)
MINIMUM
(LEVELERS IN)
15
1
/4" (387)
ROUGH
OPENING
WIDTH
NOTE: ROUGH OPENING DEPTH IS
24" (610)
LOCATE
ELECTRICAL
ANYWHERE ON
BACK WALL
E
FRONT VIEW
Wine bottles are heavy. A fully loaded
unit will weigh over 200 lbs (91 kg). Be
sure the subflooring is adequate for the
weight of both the unit and its contents.
The Model 315W is intended for indoor
use only.
ROUGH OPENING DIMENSIONS