Filter
Top Products
Wine Storage Shelves
M
odel 315W has roller-assembly shelves with a full three-
quarter extension for easy access to all stored bottles.
Each wine shelf holds four (750 ml) bottles. An additional
two bottles may be placed on the bottom stationary shelf
for a total capacity of 26 bottles. Refer to the illustration
below.
IMPORTANT NOTE: Never keep anything other than wine
bottles on the wine shelves; smaller beverage bottles are
unstable and may easily fall out and break.
The shelves have a solid natural cherrywood facing that
can be replaced with other wood to match your cabinetry.
Details on how to replace the shelves’ wood facing can be
found in the Sub-Zero design guide. Check our website at
subzero.com.
IMPORTANT NOTE: If you choose to stain or seal the
shelves’ natural cherrywood facing, be aware that some of
these substances are hazardous and will damage wine.
Model 315W Wine Storage Operation 6
WINE STORAGE SHELF REMOVAL
To remove a wine storage shelf, pull the shelf out to its full
extension, gently and evenly lift up on both sides of the
front of the shelf and remove. Reverse the procedure to
reinstall the shelf.
IMPORTANT NOTE: Wine storage shelf removal will be
more difficult if the door cannot open to a minimum of
120°, as in a corner application.
Wine storage shelves.
Be sure to unload all bottles from the wine storage
shelf before removing it.