Filter
Top Products
Model 315W Wine Storage Care 8
Cleaning
CONDENSER CLEANING
Clean the condenser area every three to six months. The
cleaning schedule will depend on the amount of dust and
lint that accumulates in this area.
To access the condenser area, use a Phillips screwdriver
to remove the kickplate. Refer to the illustration below for
location of the condenser. Using a soft bristle brush,
vacuum to remove dust and lint from the condenser area.
IMPORTANT NOTE: To avoid bending the condenser fins,
be sure to vacuum in the direction of the fins (up and
down).
CONDENSER
Location of condenser.
Failure to clean the condenser could result in tempera-
ture loss or mechanical failure or damage.
Before cleaning the condenser, shut off power to the
unit by turning the control knob to OFF. When you
clean the condenser, wear gloves to avoid injury from
t
he sharp condenser fins.