Filter
Top Products
Ice Machine Installation 11
subzero.com/specs
Reverse Door Swing
5
) Remove the ice machine top cover by removing the
two screws along the back of the unit. Refer to the
illustration below.
6) Remove four screws from the front top rail. Refer to the
illustration below.
7) Pivot the top rail end for end to expose the two left-
hand top hinge screw holes and reinstall.
8
) Remove two screws from the lower edge of the bottom
trim plate and slide the trim plate to the right, to cover
the right-hinge mounting screw holes. The left-hinge
mounting screw holes will now be exposed. Refer to
the illustration below.
9) Reinstall the door by mounting hinges using the left-
hinge mounting holes. Reinstall the shim removed in
step 1, between the cabinet and bottom hinge. Check
operation of the door by opening it.
TOP RAIL
SCREWS
Remove front top rail.Remove top cover.
TOP COVER
SCREWS
Bottom trim plate.
TRIM PLATE
SCREWS