Filter
Top Products
12
BEEPS DURING OVEN
SETTINGS
• ONE BEEP: Oven accepts the entry.
• TWO BEEPS: Oven does not accept
the entry, check and try again.
SETTING THE CLOCK
This is a 12-hour clock. When the
oven is first plugged in or when power
resumes after a power interruption,
the display will show ENTER CLOCK
TIME. If you prefer to not have the
clock displayed, touch RESET pad. You
can check the clock time while cooking
is in progress by touching the CLOCK
pad.
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one
for hour and two for minutes).
3. Touch CLOCK pad again.
SETTING THE OVEN TIMER
1. Touch TIMER pad.
2. Enter the amount of time you
want to count down by touching
the number pads. Digit time is in
minutes and seconds and set left
to right. Set one digit (a 5 for 5
seconds) or up to four digits (2405
for 24 minutes, 5 seconds).
3. Touch START/STOP pad.
NOTE:
1. Time countdown can be seen in
display for 3 seconds before clock
or cooking time is returned to
display.
2. Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
SETTING COOKING TIMES
AND POWER LEVELS
One-stage Cooking
1. Use the number pads to set a
cooking time. You can set a cooking
time from one second to 99 minutes
and 99 seconds. If you are setting
a time greater than one minute, you
must enter numbers for both minutes
and seconds. For example, to set
20 minutes, enter 2,0,0,0.
2. If you want to set a power level
other than 100% power, touch
POWER, then use the number pads
to enter the power level. You can
set the power level from 1 to 9.
3. Touch START/STOP to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
Operation Instructions
English English