Filter
Top Products
18
The coffee making process involves extracting
oils out of coffee grinds to make espresso
coffee. Deposits of these oils build up over time
and affect the taste of the coffee and operation
of the espresso machine.
Regular cleaning to remove these oils is
essential for espresso machines to keep
operating effectively. Flushing water, through
the brewing head and the steam wand, is the
easiest way to keep your machine clean after
making each coffee, and at the end of your
coffee making session.
Important: Never wash your espresso machine
accessories in the dishwasher.
Drip tray
Remove the grid and drip tray at regular
intervals to empty (41), (42). If the red floating
level indicator appears through the grid, empty
the drip tray immediately.
Clean the drip tray and its grid with water and
a little non-abrasive washing up liquid, rinse
and dry.
Over time it is normal for the inside of the drip
tray to be stained by the oils in the coffee.
Note: Ensure that when you are replacing the
d
rip tray that the plastic lining is in position (43).
The brewing head, filters & group handle
The filter and group handle should be washed
after each use by rinsing them under warm
water. Wash at regular intervals in warm soapy
water using a mild detergent.
To clean the brewing head, flush water through
and wipe the head and around the inside rim
with a damp cloth.
To assist in keeping the filter and the brew
head clean, at the end of each coffee making
session we recommend you run the machine,
with the filter in place, without coffee – using
water only.
Should the holes in the filters become clogged
with coffee granules use a fine bristled brush to
remove them.
Important: Should the filter remain blocked
after normal cleaning, supplied with your
espresso machine is a cleaning wire. The
cleaning wire for the filter is located under
the base of the water reservoir (37) with the
cleaning wire insert it into the single hole in
the base of the filter (40).
Care and Cleaning