Filter
Top Products
8
Care and Cleaning
Always turn the power off and remove the
plug from the power outlet after use and
before cleaning. Allow appliance to cool
before cleaning.
Control probe
If cleaning is necessary, wipe over with a
damp cloth.
Note: The control probe must be removed
before the frypan is cleaned and the control
probe inlet must be dried before the frypan is
used again.
Important: Do not immerse the control probe in
water or other liquid.
Store the control probe carefully. Do not
knock or drop it as this can damage the
probe. If damage is suspected, return the
control probe to your nearest Sunbeam
Appointed Service Centre for inspection.
Refer to the separate warranty and service
centre booklet.
Glass lid
Wash the lid in warm soapy water using
a soft sponge, rinse and dry thoroughly
Alternatively, wash the lid in a dishwasher.
To clean interior and exterior surface.
• When cleaning the non-stick coating do
not use metal (or other abrasive) scourers.
After cleaning, dry the frypan and lid with
a soft cloth before storing.
• Wash in hot soapy water or in a dishwasher.
Remove stubborn spots with a plastic
washing pad or sponge.
• The heating element is totally sealed,
making the frypan vessel safe to fully
immerse in water, or place in a dishwasher.
• Wash as directed, and re-season the frypan
before using again. In some instances this
may not remove all the staining.