Sunbeam JE5600 Juicer User Manual


 
Assembling your Sunbeam
Double Sieve Juicer
Before Use
AfterunpackingyourDoubleSieveJuicer
we recommend that you dissemble the unit
before using for the first time. Wash all parts
exceptthemotorbaseinhotsoapywater.
Rinse and dry immediately.
Important:Alwaysensureyourjuiceris
unplugged from the power outlet when not
in use, during assembling or whilst removing
parts.
1. Set the motor base on a dry, level surface.
Forconveniencewhenjuicing,havethe
control switch facing you – figure 1.
2.Placethejuicecollector/bowlontothe
topofthemotorbase–figure2.
3.Positionthestainlesssteeldoublesieve
filtering basket onto the motor drive shaft
and push down until firmly in place –
figure3.
Important: Ensure that the card disc
protectingtheDoubleSievefilterbasket
blades is removed before use.
4.Placethejuicercoverontothejuice
collector/bowl,withthefeedchute
positioned over the stainless steel double
sieve filtering basket and push into
position – figure 4.
Figure 3
Figure 4
Figure 1
Figure 2
7