Filter
Top Products
Before using your Beatermix Pro
Before fitting the beaters or dough hooks, be
sure the power cord is unplugged from the
power outlet and the speed control switch is
in the ‘0’ OFF position.
1. Select the desired attachments,
depending on the mixing task to be
performed: beaters for mixing and
beating, or dough hooks for kneading.
Inserting the beaters
2a. Beaters can be inserted into either
socket, as the beaters are identical.
Inserting the dough hooks
2b. To insert the dough hooks, place the
dough hook with the small washer into
the left socket. Place the other dough
hook into the right socket.
Note: Ensure both beaters and dough
hooks are fully inserted into the correct
sockets or your mixing results may be
affected.
Using your Beatermix Pro
1. With the speed control switch in the ‘O’
OFF position, plug the power cord into a
230-240V AC power outlet.
2. Place the beaters or dough hooks into the
ingredients to be mixed and using the
speed control switch select the desired
mixing speed.
Select the Low range setting for kneading
dough and thicker mixtures, folding, or
when using the dough hooks. Select the
High range setting for mixing, beating,
and whipping.
Clearly marked instructions for correct mixing
speeds for each type of mixture are shown in
the mixing guide on page 5.
Tip: Always start mixing at slow speeds and
increase the speed gradually to prevent
ingredients splashing out of the mixing
bowl.
When adding dry ingredients use the
lowest speed to prevent the ‘snow storm’
effect.
3. Once you have finished mixing, turn the
speed switch to the ‘0’ OFF position and
unplug the cord from the from the power
outlet. Remove the beaters/dough hooks
from the mixture and press the eject
button firmly to release.
4. To remove the beaters/dough hooks, place
fingers loosely around the spindles and
press the eject button located at the front
of the head of the Beatermix Pro.
Note: Never eject the beaters or dough
hooks when the Beatermix Pro is in
operation.
4
Using your Beatermix Pro