Filter
Top Products
11
Using the Memo function
It is important to change your filter cartridge
regularly to enjoy the benefits of filtered
water and keep your kettle scale free.
The BRITA Memo system automatically
reminds you when your filter cartridge needs
to be changed.
When you have fitted and prepared your filter
cartridge, start the Memo system as follows:
• Press and hold the Start button until 4
bars appear on the display and flash twice.
The Memo is now set. The flashing dot in
the corner of the display indicates that the
Memo is working. See figure 5.
It is important to change your filter cartridge
regularly to enjoy the benefits of filtered
water and keep your kettle scale free.
The BRITA Memo system automatically
reminds you when your filter cartridge needs
to be changed.
When you have fitted and prepared your filter
cartridge, start the Memo system as follows:
• Press and hold the Start button until 4
bars appear on the display and flash twice.
The Memo is now set. The flashing dot in
the corner of the display indicates that the
Memo is working. See figure 5.
• At the end of every two weeks, one
bar will disappear to indicate the
remaining cartridge life. When only one
bar is showing, check that you have a
replacement filter cartridge available. See
figure 6.
• After 8 weeks, all four bars will disappear
and a flashing arrow will appear to indicate
that the cartridge should be replaced. See
figure 7.
Wash and dry the filter funnel, insert a new
cartridge (see 'Preparing the filter cartridge
for use') and restart the Memo as described
above.
Note: The Memo system is only intended to
be used with BRITA filter cartridges.
BRITA
®
Figure 5
BRITA
®
Figure 6
BRITA
®
Figure 7