Filter
Top Products
12
Reversible grating, or slicing blades
1. Fit the processor bowl and spindle as
detailed previously, in figures 1, 2 and 4.
2. Select the 'Reversible' disc of your choice
- Shredding (fine or coarse), Slicing (thin or
thick).
3. Fit the disc over the spindle and press
firmly into place, see figure 6.
Warning: Use caution as the blades are sharp.
4. Fit the processing cover to the processing
bowl as previously shown in figure 3 and
place the food pusher in the feed tube.
5. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
6. Start processing using the On/Off button.
7. When processing is complete, remove the
disc and spindle from the processing bowl
before removing the processed food.
Fitting/using the tools on your Oskar™ Mini continued
Fig 6
MAX