Sunbeam LC9000 Food Processor User Manual


 
Reversible grating/shaving, shredding and
julienne discs
1. Fit the processing bowl and spindle as
detailed previously, in figures 1, 2 and 4.
2. Select the 'Reversible' disc of your choice –
Shredding (fine or coarse), Grating/Shaving
or the dedicated Julienne disc.
3.Fitthediscoverthespindleandpress
firmly into place, see figure 6.
Warning: Use caution as the blades are sharp.
4. Fit the processing cover to the processing
bowlaspreviouslyshowninfigure3and
place the food pusher in the feed chute.
5.Plugthepowercordintoa230-240VAC
power outlet and turn the power ‘ON’.
6. Start processing using the START/STOP
button.
7.Whenprocessingiscomplete,removethe
disc and spindle from the processing bowl
before removing the processed food.
Variable slicing blade
1. Fit the processing bowl and spindle as
detailed previously in figures 1, 2 and 4.
2. Fit the slicing disc over the spindle and
press firmly into place, see figure 7.
Warning: The variable slicing blade can be
used in the large processing bowl only.
Do Not use the variable slicing blade in the
small bowl.
Warning: Use caution as the blades are sharp.
3.Fittheprocessingcovertotheprocessing
bowlaspreviouslyshowninfigure3and
place the food pusher in the feed tube.
4.Plugthepowercordinto230-240VAC
power outlet and turn the power 'ON'.
5. Start processing using the START/STOP
button.
6.Whenprocessingiscomplete,removethe
disc and spindle from the processing bowl
before removing the processed food.
Fitting/Using the tools on your Café Series
®
Food Processor
continued
Fig 7
Fig 6
12