Filter
Top Products
Using your Stainless Drip Filter
Before using your Stainless Drip Filter for the
first time
It is recommended that you clean your drip
filter prior to first use by the following:
1. Place the Stainless Drip Filter on a flat,
level surface.
2. Add water into the drip filter by opening
the water tank lid and filling to the
maximum capacity (12 cup) mark.
3. Ensure the filter basket holder and
removable mesh filter basket are firmly
positioned into place and close the water
tank lid.
4. Place the empty carafe into position on the
keep warm plate and connect the plug into
a 230/240 Volt AC power outlet. The LCD
will illuminate and display ’12.00’.
5. Press the ON/AUTO/OFF button once. Water
will start to drip through into the carafe.
6. Once all the water has dripped through
and the water tank is empty, press the ON/
AUTO/OFF button twice. This will turn the
appliance off.
7. Wash the carafe, filter basket holder,
removable mesh filter basket and supplied
coffee spoon in warm, soapy water and
rinse and dry thoroughly and position back
into place in the appliance.
Your Stainless Drip Filter is now ready to use.
Setting the current time of day on the LCD
Important: The clock only needs to be set
if you are using your Stainless Drip Filter
in ‘AUTO’ mode. You do not need to set
the clock for the manual operation of your
Stainless Drip Filter.
1. Place the Stainless Drip Filter on a flat,
level surface.
2. Connect the plug into a 230/240 Volt AC
power outlet. The LCD will illuminate and
display ’12.00’.
3. Press the PROGRAM button once. The
screen will display ‘SET CLOCK’.
4. Press the HOUR button until the correct
number of hours is displayed. You can
hold the button down to scroll through the
numbers quickly.
5. Then press the MIN button until the correct
number of minutes is displayed. You can
hold the button down to scroll through the
numbers quickly.
Note: The time is displayed based on
24-HOUR digits.
6. Once you have set the desired time, either
press the PROGRAM button twice to set, or
wait 10 seconds until the MIN button stops
illuminating.
5