Filter
Top Products
Using your StickMaster
®
It is recommended to wash your StickMaster
®
wand, beaker, chopping bowl (SM7400) and
whisk (SM7400) in warm soapy water with a
soft cloth. Rinse and dry thoroughly.
Important: Before using your StickMaster
®
remove any packaging material and
promotional labels or tags.
Important: Ensure that the StickMaster
®
is
unplugged from the power outlet before
assembling or removing attachments.
1. Insert the motor housing into the wand and
twist the wand in a clockwise position until
the two pieces are locked together.
See figure 1.
2. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
3. Lower the stick mixer into food and
depress the power button (
) or
(
) at the top of the motor housing.
Setting (
) is low speed and setting
(
) is high speed.
Note: All stick mixers are designed to
operate only when the power buttons remain
depressed.
Note: The power button (
) should be
released when selecting the turbo speed
button (
).
4. To stop the stick mixer, take your finger off
the power button (
) or the turbo speed
button (
).
5. To detach the wand, twist the shaft in
an anti clockwise position until the wand
unscrews from the motor housing.
See Figure 2.
6
Figure 1
Figure 2