Filter
Top Products
6
For Best Results
The cooking times stated in this booklet are
a guide only. The steaming time required for
specific foods is affected by the following:
• The size, quality and the temperature of
the food.
• The degree to which you like your food
cooked.
• The temperature of the water used for
steaming.
To ensure good results using your VitaSteam
Electronic, follow these simple tips: –
• Remove food soon after the steaming cycle
is completed. Food will continue to cook
slightly with the keep warm function.
• Food should be arranged evenly in all
steamer bowls. Foods of uniform size will
steam at a similar rate.
Using your VitaSteam Deluxe (continued)
3. Press the “SET” button again, and the
word “TIMER” will appear on the LCD.
Press the MIN (minutes) button to the
desired delay time. There is a maximum of
30 minutes that this function can be used
for. Once the delay time has been chosen
the unit will turn on automatically after
5 seconds and the delay countdown will
begin. Once the delay time has finished
the Steamer will start the cooking process.
Keep warm function
The steamer is fitted with a “Keep Warm”
function. Once the selected cooking time
has finished the Steamer will beep 5 times.
The unit will automatically go to the “Keep
Warm” function where the Steamer will
switch itself on and off releasing a small
amount of steam at a time to keep your food
warm. The Steamer will stay in the “Keep
Warm” setting function for 1 hour. After 1
hour the Steamer will beep 3 times and the
Steamer will turn off.
Automatic boil dry sensor setting:
The Steamer is fitted with an automatic boil
dry sensor which switches off the heating
element if the base is accidentally switched
on empty or boils dry. If this occurs a
continuing beep will sound and the Neon
light will blink. If cooking, the timer will
stop. Refill water through the spout and press
the “SET” button to recommence the cooking
process. The timer will continue with the
remaining cooking time left on the LCD.