Filter
Top Products
When you have finished processing, unplug your
Oskar 400 from the power outlet and remove the
Cover, Slicing/Shredding Disc or Processing Blade
and the Bowl from the Motor Base.
Motor Base
Wipe with a damp cloth.
Note: Never immerse in water or other liquid.
Never use a harsh detergent or abrasive.
Processing Bowl, Cover and Food Pusher
Wash in warm to hot water using a mild
detergent.
Processing Blade
To remove the processed ingredients, simply
remove the processing blade with processed food
clinging to it, then clean the blade with a spatula
before emptying the remaining food from the
processing container (18).
To clean inside the base shaft, use the back of a
knife or spoon handle to get right inside.
Processing Blade and Slicing/Shredding Disc.
Wash in warm to hot water using a mild
detergent. The internal shaft can be cleaned with
a bottle brush and then dried thoroughly. If
using a dishwasher, always place in top shelf
away from the elements.
Food Odours and Stains
Strong smelling foods like garlic, fish and some
vegetables such as carrots may leave an odour or
stain on the processing bowl. To remove odour
from the processing bowl, always rinse with cold
water first. To remove slight staining, place a
small portion of bi-carbonate of soda onto a
damp cloth and rub the stain. Allow to stand for
a few minutes before washing up.
To remove more stubborn stains or odours,
immerse processing bowl in water mixed with a
little kitchen bleach and allow to stand
overnight.
Wash with a mild detergent the following day
and dry thoroughly. Store without lid in position
until next required.
Note: Never use any chemical, steel wool, harsh
abrasive cleaners, thinners or chemical dust cloths
for cleaning any parts of your food processor.
Important: The processing blade and
slicing/shredding disc are extremely sharp! Use
caution when handling and storing these parts.
Dishwasher Safe
All plastic components deteriorate through the
prolonged use of a dishwasher for cleaning.
However, parts of your Oskar 400 are tolerant to
dishwasher use.
These include the processing blade, reversible
slicing/shredding disc, ejector disc and the food
pusher.
Note: Place only on the top rack of your
dishwasher.
12
Cleaning, storing and caring for Oskar 400.
Sunbeam is a registered trademark. Oskar is a trademark of
the Sunbeam Corporation. Made in China. Due to minor
changes in design or otherwise, the product may differ
from the one shown in this leaflet. Approved by the
appropriate Electrical Regulatory Authorities. Backed by
Sunbeam‘s 12 Month Replacement Guarantee and National
Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2002.
(INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on this or any other
Sunbeam appliance, visit
www.sunbeam.com.au
or contact the Sunbeam Consumer Service Line.
Australia 1800 025 059
New Zealand (09) 912 0747.
(18)